MCP Ripley Rotor on triton

[J_618]

Has anyone put the 7 1/8" ripley rotor on a triton? What all is needed to do this. figured i would have to have a different caliper mount for the larger diameter rotor. Thanks

 

[sundog]

You might also need shims to spread the caliper if the new rotor is thicker.

 

[medusa51]

I did this you will need the caliper mount that BMI sells and the larger caliper + shims I had to cut some of my floor pan also.

 

[J_618]

I did this you will need the caliper mount that BMI sells and the larger caliper + shims I had to cut some of my floor pan also.

did you notice a big difference in brake performance?

 

[medusa51]

I did it because my mini light was on the right side and I could not put a larger disk on so I put it on the left side. No difference in braking.

 

[Bradley71]

I did it because my mini light was on the right side and I could not put a larger disk on so I put it on the left side. No difference in braking.

Mcp makes a thick rotor now,all ya have to do is add shims even fits mini lite