J Joker19 Member Jul 4, 2020 #1 My tach keeps reading the whole race time not lap time. How do I change that.
Gab507 Member Jul 4, 2020 #2 Go into the setting and set a minimum lap time. Pick something something under a normal lap time.
flattop1 Dawg 89 Jul 4, 2020 #3 In the menu . The lap time value needs changed . I it needs to be less then lap time . Go too the wrench not the wrench with the star . Tha aim logo next too the light bulb .
In the menu . The lap time value needs changed . I it needs to be less then lap time . Go too the wrench not the wrench with the star . Tha aim logo next too the light bulb .
L Lightning3 Member Jul 4, 2020 #4 Should we assume you have a lap receiver hooked up and have it facing the beacon?
sundog Member Jul 5, 2020 #5 And also assume there is a beacon? Check your obscuring time, should be shorter than a lap.
R racinnut15xm Member Jul 5, 2020 #6 And that the lap sensor is working we had a bad one at one point. Guy on YouTube had a good tutorial for getting one all setup
And that the lap sensor is working we had a bad one at one point. Guy on YouTube had a good tutorial for getting one all setup
J Joker19 Member Jul 10, 2020 #7 So thanks everyone. Come to find out the four pin was broke inside, sent in and fix the crack screen for 50 bucks.
So thanks everyone. Come to find out the four pin was broke inside, sent in and fix the crack screen for 50 bucks.