Mikuni 34mm parts

[Bradley71]

Who has new throttle shafts for burco 34mm carb.
And who has the 3 stacks for them also.thanks bradley

 

[deznutz]

Buller makes shutters and shaft for the mukuni 34mm and I think his stacks work on them to I would call and talk with buller. Hopefully this helps you.

 

[garlandkart11]

Terry Dines over on Facebook Vintage sites is making Billet parts and carbs.

 

[Bradley71]

Buller makes shutters and shaft for the mukuni 34mm and I think his stacks work on them to I would call and talk with buller. Hopefully this helps you.

is it me or did buller used to make a .010 over sized mikuni shaft.i called them and marysaid it should be stock sized.im almost a 100 percent sure i bought one a few yrs back that was oversized.

 

[Red Arrow]

a liitle off topic, but does anyone know the "stock" size of the metering (hi/lo) holes on the Mikuni 34? thanks.

 

[Cliff Casterline]

I use a tillson 34mm shaft on my mikuni. You have to use a copper tube that fits over the shaft. But it works

 

[Jon Brogden]

Red Arrow , the HS needle hole is .089, LS is .072 stock , with a .055, .046 and .029 under the welsh plug.