J jimlinden18 New member Mar 4, 2022 #1 My LO206 valve guides are in unequal positions does any know if they should be flush?
Freezeman Site Supporter Mar 4, 2022 #2 They are supposed to be unequal. The exhaust side is up out of the hot flow of the exhaust port and the intake is down.
They are supposed to be unequal. The exhaust side is up out of the hot flow of the exhaust port and the intake is down.
P Paw Fowler Member Mar 4, 2022 #3 The Briggs rule #19-h will explain were the intake guide must be placed in the port & it is checked in TECK
The Briggs rule #19-h will explain were the intake guide must be placed in the port & it is checked in TECK
CarlsonMotorsports Site Supporter Mar 5, 2022 #5 Valve Guides: Replacement of valve guides with B&S part #555645 only is allowed. Maximum depth from the head gasket surface to the intake valve guide is 1.255”. EX guide can be flush. ----- Thanks and God bless, Brian Carlson Carlson Racing Engines Vector Cutz www.CarlsonMotorsports.com Carlson Motorsports on Facebook 33 years of service to the karting industry ~ 1Cor 9:24 Linden, IN 765-339-4407 bcarlson@CarlsonMotorsports.com
Valve Guides: Replacement of valve guides with B&S part #555645 only is allowed. Maximum depth from the head gasket surface to the intake valve guide is 1.255”. EX guide can be flush. ----- Thanks and God bless, Brian Carlson Carlson Racing Engines Vector Cutz www.CarlsonMotorsports.com Carlson Motorsports on Facebook 33 years of service to the karting industry ~ 1Cor 9:24 Linden, IN 765-339-4407 bcarlson@CarlsonMotorsports.com