46 front %. Under loaded RR. Do you mean to much cross?Under loaded RR, OR to much front end grip
Need more bite in the RR, it snaps loose center off. Need my rr to grab.
Minecon Hoosier treads predator stock.How is the kart set up currently? What kind of chassis is it? What class? Tires? Track? The more info, the better we can help...
No, since you say SNAP loose, are you sure it's not pushing earlier in the turn, then when it grabs it snaps loose ?46 front %. Under loaded RR. Do you mean to much cross?
how much rear stagger ?Minecon Hoosier treads predator stock.
1 1/4. Tried 1”how much rear stagger ?
No. 8”By chance you Didn't change LR wheel from 8 1/2 " to 8 1/4 " without moving the hub ?
To try to help with pressure change you would lower RR air, How high is the top of the seat off the axle ?Really never got better, keep trying other stuff. Like at 2 pound split on LR. I can’t get to hook up RR. Wore out the outer edge on both side of the tire(flipping)
How far is LR inside edge off wheel off the frame 3/4 " like we talked about ?No. 8”
8 3/4To try to help with pressure change you would lower RR air, How high is the top of the seat off the axle ?
YesHow far is LR inside edge off wheel off the frame 3/4 " like we talked about ?
There could be part of it probably to low, raise it to 9 1/4 ", what is the rest of the numbers ? cambers ? casters ?8 3/4
Could be but what works for some, does not mean it works for all.I will have to get my notes for caster and camber. Haven’t checked duro on the tires. Thought I read from PRC that seat height was 8 3/4 from axel