nemesis setup

J

JHW87

New member
need some setup numbers for my phantom nemesis for a small flat oval clay track also need to know what to set front ride heights to there are 15 washers on both sides how many need to b under spindle and how many on top of spindle any info appreciated thanks
 
Try 441/2% nose 55% left 56-58 cross just move washers till you get that number, +3/4 left front camber -2right front camber, caster on factory settings, try 13/4 rear stagger and 11/4 front stagger
Mine feels pretty good there prolly not perfect but it a starting point
 
I was just doing some research and im thinking this kart I have is a gauntlet instead of a nemesis how can I tell for sure what it is
 
You must log in or register to reply here.
Back
Top