New build advice

I building a non hemi 212 and need some advice. Its pretty much recreational for me chasing my son around the local tracks. This is what I have come up with so far.

Non Hemi Predator 212 (I have this)
Real Mikuni VM22 gas (I have this and the adapter)
ARC billet flywheel (What's the difference between this and the cheaper PVL besides the advancing and being cast)
ARC billet rod +.020 3.328
DynoCams 308
32# dual valve spring set
5.260 chromoly push rods (do I need these)
Stock everything else
 

flattop1

Dawg 89
Yes on the push rods .
You'll need the attending retainer and keepers .
Flywheel obviously the advance . Timing key position and the weight of either .
 
Would it be worth saving $40 going with the PVL with a 6 degree key since I need to still get a 2 degree key for the ARC to get the 34 degrees the cam calls for? Also any recommendations on exhaust with muffler for this setup.
 

flattop1

Dawg 89
Yes . Any predator pipe , not the mini's . Rlv muffler .
Call Jerry Dover or Robertson's.
You do have a class for this ?
 
I building a non hemi 212 and need some advice. Its pretty much recreational for me chasing my son around the local tracks. This is what I have come up with so far.

Non Hemi Predator 212 (I have this)
Real Mikuni VM22 gas (I have this and the adapter)
ARC billet flywheel (What's the difference between this and the cheaper PVL besides the advancing and being cast)
ARC billet rod +.020 3.328
DynoCams 308
32# dual valve spring set
5.260 chromoly push rods (do I need these)
Stock everything else
Those springs are overkill unless you are running 1.3 rockers with standard rockers you can twist it up over 8k with 26 pound white stripes
 
Top