TritonJrBluePlate
Member
Correct!They are not the driver in the yellow kart. They are in the white kart getting beat to crap.
Correct!They are not the driver in the yellow kart. They are in the white kart getting beat to crap.
OK, makes sense now!They are not the driver in the yellow kart. They are in the white kart getting beat to crap.
Are you replying to me,Not sure if you're the driver in the yellow kart (with helmet cam) or not but if I was the leader in that race I'd be really questioning your driving ability! You beat on his bumper even after yellow comes out, not to mention you turned the second place kart right at the start causing the first caution and got to keep your spot?
No he was not responding to you, unless your the yellow kart in the video lolAre you replying to me,
I race dirt oval karts in the upper midwest not the southeast, I won my race in Michigan
Nope im an orange dirt oval kart from the upper midwestNo he was not responding to you, unless your the yellow kart in the video lol
I can’t move washers or wheel hubs. This kart is running two classes. The details are above.To tighten up the kart, You need more cross.
Reduce rear stagger
or
Move LR in, toward the frame, 1/4-1/2”
or
Move a couple washers, from bottom to top on RF, or top to bottom on LF
He’s 14 and been racing exactly 1 year. But we get to use his videos to get better.The yellow kart driver has been racing for a good while. I have watched him on YouTube for a while and he has always been a very aggressive driver. He does pretty good but if you go back and watch some of his older videos he isn’t that aggressive to most people. I think he is that aggressive because the guy in the white kart is like 15 or 16 and whoops his butt so he gets mad.
Have you tried racing with the added weight instead of removing it ?I can’t move washers or wheel hubs. This kart is running two classes. The details are above.
I’m going to have to do it with stagger and shifting of the extra weights that we remove for Jr3.
But, I will get it done and it will be correct fir both classes.
Moving washers is easy for each class , a lot easier than having another set of tires to keep up with.I can’t move washers or wheel hubs. This kart is running two classes. The details are above.
I’m going to have to do it with stagger and shifting of the extra weights that we remove for Jr3.
But, I will get it done and it will be correct fir both classes.
Moving washers will change my nose and left though. All I’m doing now is add or removing weights. I have to take the tires off anyway to move the washers. This would be another step.Moving washers is easy for each class, hell of a lot easier than having another set of tires to keep up with.
No haven’t. I really don’t want to. There are some kids in that class that are weighing in at 360#. If we can remove it we just have a big advantage.Have you tried racing with the added weight instead of removing it ?
You can glue 2 or 3 washers together, makes moving them quicker.Moving washers will change my nose and left though. All I’m doing now is add or removing weights. I have to take the tires off anyway to move the washers. This would be another step.
Moving washers will change my nose and left though. All I’m doing now is add or removing weights. I have to take the tires off anyway to move the washers. This would be another step.
FYI your or even mine setup are never perfect, if you gotta move washers do it the other minimal changes might just help the sweet spot.Moving washers will change my nose and left though. All I’m doing now is add or removing weights. I have to take the tires off anyway to move the washers. This would be another step.
This is correct.Add cross back to it.
moving washers should not change the nose or left. You have to move the pieces of lead around to change that. Washers are just cross.Moving washers will change my nose and left though. All I’m doing now is add or removing weights. I have to take the tires off anyway to move the washers. This would be another step.
I respectfully disagree with this.moving washers should not change the nose or left. You have to move the pieces of lead around to change that. Washers are just cross.