Oh no moment

flattop1

Dawg 89
Dig the pressure washeer out , unused for 2 seasons .
Of course won't start. Pull bowl, poke a wire in the jet ,shoot brake kleen in any accessible hole and drain out some fuel .
Shoot some either it's running.
Run out the fuel . Refill , should check oil , run some more stop .
Restart scrump it stops ; check oil of course there is none .
Refill over full roll machine around pulling the string to get oil in all the right places . Refire work it till it wants to stop .
Let cool over night drain out refill , right back too work .
Yes there was some aluminum in the oil .
Check the oil dummy.
 
The water flow may be restricted, the engine doesn't have enough hp to over come it and it is forced to a stop. After not using my 'new' pressure for two years until I flushed the water lines etc. the engine did not want to run at all. crap blew out and the engine took off ok
 
I thought I was the only one.
Qualified and engine went dead coming off Track, Put back on stand and noticed my 14 oz of fresh oil was still on my work table. Said bad words.
 
Back
Top