racinnut15xm
Member
Got a panther kart that is very close to a qrc. Lower frame is 1 1/8 tubing. Driver is about 240, race ready kart is about 500, has 450 crf, driver is tallerish say 6 2. We have done alot of stuff to try to get the bounce out of it. Running hoosier treads 50 RR required.
Is it possible the driver is just too big and COG too high for the 1 1/8 frame? We adjusted the camber and it looked good when he was out of the kart and once he gets in the LF goes from positive to negative.
Is it possible the driver is just too big and COG too high for the 1 1/8 frame? We adjusted the camber and it looked good when he was out of the kart and once he gets in the LF goes from positive to negative.