Yes were engaging at 2700 and I was told to be engaging at 3300 thats why I was asking for more opinions also.Also interested in this question, we had been engaging at 2400 and recently told that was too low. tried 3500 this weekend and i'm thinking it was a tick too high, thinking I want to adjust for 3300 this coming weekend? would be interested in any comments on this topic thanks
Sr Champ minimum weight 3452800-3000 has been our sweet spot depending on the class weight
Did u see a difference with the switching to the 3500 rpm range this past weekendOur class is 350 min. weight. I was running a hillard Fury but switched to a 2 disk 4 spring bully this weekend.
And your a box stock predator also?yes, an improvement. still getting pulled out of the corners a bit but its better. 3500 is our max torque so i'm going to try 3300 next.
you need to get to 2700-3000. and the weight class has nothing to do with clutch engagement rpm.yes, an improvement. still getting pulled out of the corners a bit but its better. 3500 is our max torque so i'm going to try 3300 next.
Sounds good ill try that this weekend, were getting beat off the startyou need to get to 2700-3000. and the weight class has nothing to do with clutch engagement rpm.
I run all white springs and a heavy weight in every hole for my predator clutch.
I use hillards on my clone, flathead, and my predator. they are all set up as well as possible and no one with a bully pulls away from me ever. i don't care how much you spend on a clutch or what color they anodize the basket if you don't set the correct stall speed you're getting left behind on the start.
are you running oval. or a twisty course? if oval you clutch should be engaged the whole way round.for us, its not so much the start its pull out of the corners where they are beating us. a tick at the ends of the straights, but you can really see them pull away or suck up to our bumpers on corner exit.
4 whitefor us, its not so much the start its pull out of the corners where they are beating us. a tick at the ends of the straights, but you can really see them pull away or suck up to our bumpers on corner exit.
4 white loaded with heavy weights for the Hillard blaze is 3000rpm that sound right?are you running oval. or a twisty course? if oval you clutch should be engaged the whole way round.
YesSo their getting through the corners better.
1/5th mile oval asphalt. my tach wont show RPM drop so i am without that information.are you running oval. or a twisty course? if oval you clutch should be engaged the whole way round.