This is probably gonna be a silly post but just wanna get some feedback. We have a 17 MINecon , we run a 270 lb stock predator class on treaded hoosiers. Tonight it was pushing like a lead sled in the apex . I had about 1.5 roll across the back and little over 2scross the front. I know this wasn't helping so i swapped and got the biggger tire on rr and smaller on rf. It did help some but still had a push. When we scaled it we had these numbers:
47.1 - Nose
54.7 - left
67.5 - cross .
At this time the camber was off, after we scaled it and got home I realized the motor was forward about 4 inches in front of rear nerf spud, and all the way right. So I moved the motor back and to the left. Also at this time I set the camber with the boy in the kart , and got it +.25 and -2.50 . my question is how far was we off with our numbers, and is it possible it changed the numbers after I changed camber, and moved the motor around. I appreciate any input , thoughts, or suggestions, I am still learning these new karts so I do appreciate it.
Thanks
47.1 - Nose
54.7 - left
67.5 - cross .
At this time the camber was off, after we scaled it and got home I realized the motor was forward about 4 inches in front of rear nerf spud, and all the way right. So I moved the motor back and to the left. Also at this time I set the camber with the boy in the kart , and got it +.25 and -2.50 . my question is how far was we off with our numbers, and is it possible it changed the numbers after I changed camber, and moved the motor around. I appreciate any input , thoughts, or suggestions, I am still learning these new karts so I do appreciate it.
Thanks