Grandson is 15 yo, started purple plate Honda clone racing in 2020, about 6 race nights and 2021, 6 race nights.
Chassis - 2005 Millenium Tempest (1-1/4" tube). 45% front, 55% left and 54% cross, LF .5 camber, 8 castor, 0 toe. RH -2.75 camber, 12 castor, 1/16 toe out (accutoe which is now broken)
Tires - Burris 33s takeoffs, 58 - 60 duro, 1-1/2 front and rear staggers. 4-1/2 psi left side and 5-1/2 psi rights. As per top runner where I got the tires from, he helps me with tire prep and overall tire program.
Track - 1/9th tan color clay banked, my guess 3-4 degrees, tacky most of the time.
Performance - runs in P3 to P6 consistently. Excellent for a rookie. I follow "No Goat" instructions and ask questions especially top runners in the same class.
Problem - No matter what I try, the kart pushes about a kart width on exit, which allows the competition to have the inside. Entry is good, so is the center of the turn. Seems when he feathers the throttle from the center to exit, the front end does not respond. He tried bumping the throttle to attempt to swing the ass end around but no improvement. I adjusted rear stagger up and even front stagger. Results were not enough to close the inside. So is it driver or setup?
Thank you in advance. As suggested by "Racing Promoter" I found someone to help with tire program.
Chassis - 2005 Millenium Tempest (1-1/4" tube). 45% front, 55% left and 54% cross, LF .5 camber, 8 castor, 0 toe. RH -2.75 camber, 12 castor, 1/16 toe out (accutoe which is now broken)
Tires - Burris 33s takeoffs, 58 - 60 duro, 1-1/2 front and rear staggers. 4-1/2 psi left side and 5-1/2 psi rights. As per top runner where I got the tires from, he helps me with tire prep and overall tire program.
Track - 1/9th tan color clay banked, my guess 3-4 degrees, tacky most of the time.
Performance - runs in P3 to P6 consistently. Excellent for a rookie. I follow "No Goat" instructions and ask questions especially top runners in the same class.
Problem - No matter what I try, the kart pushes about a kart width on exit, which allows the competition to have the inside. Entry is good, so is the center of the turn. Seems when he feathers the throttle from the center to exit, the front end does not respond. He tried bumping the throttle to attempt to swing the ass end around but no improvement. I adjusted rear stagger up and even front stagger. Results were not enough to close the inside. So is it driver or setup?
Thank you in advance. As suggested by "Racing Promoter" I found someone to help with tire program.