We have a JR2 driver running a big tube RIVAL. We mainly very low bite tracks. Currently the rear axle is square and in the stock position. Would there be any improvement to moving both side of the axle forward (closer to the driver)? Again not talking about moving one side but moving the entire axle forward.
We typically fight a loose in condition and we have been through several adjustments with front stagger, RF camber, nose weight, etc. Most of these have helped some but I was just thinking a shorter wheelbase on a JR driver would transfer a little better and maybe get off the RF a little sooner on corner entry.
It is not an adjustment I want to reverse at the track so wanted to gather some feedback before messing with it.
Thanks
We typically fight a loose in condition and we have been through several adjustments with front stagger, RF camber, nose weight, etc. Most of these have helped some but I was just thinking a shorter wheelbase on a JR driver would transfer a little better and maybe get off the RF a little sooner on corner entry.
It is not an adjustment I want to reverse at the track so wanted to gather some feedback before messing with it.
Thanks