Rear Bearing Help

[juscallmemrdean]

It has been recommended to me by a fellow racer that it is time to replace the rear bearings on my daughters kart, but I have no clue what size bearing to buy. Her kart is a 2013 Trick redemption and we race pavement ovals if that matters.

Thanks in advance.

 

[CarchidiN06]

They should be either size 206 or 207. It should be engraved/etched on one of the lips of the bearing. Once you verify what size get the same size replacement from any kart shop. They will be for an 1 1/4 axle.

 

[mike97760]

Just measure the OD of the bearing, most kart parts outfits tell the sizes of the 2 bearings most commonly used in karting. It's a 206 or a 207.

 

[Ratistiss]

Just measure the OD of the bearing, most kart parts outfits tell the sizes of the 2 bearings most commonly used in karting. It's a 206 or a 207.

Outside of a 206 is just under 2 1/2. Just went through this after I got the wrong ones

 

[CarlsonMotorsports]

UC206 is considered "small bearing" for karts, while the UC207 is considered the "big bearing." Both fit 1 1/4" axle, the difference is the OD of the bearing. As said above, the part number should be right on the bearing itself, but if you are unable to find it, a simple measurement will suffice.


-----
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
www.youtube.com
34 years of service to the karting industry ~ 1Cor 9:24
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com