It would be a micro/miniIf it was suspended it wouldn’t be Kart...
This is funny.Has anyone attempted to build a chassis that rotates like a late model with rear steer, suspension and the whole setup to slam it in the corner and get some!?
your not wrong, was just talking with some of my old late model (pavement) guys and they are all on bump stops and tie down shock. so once they touch the brakes, the whole car sets down on rubber stoppers or solid poly blocks with plastic 1/8 inch shims. locks in. takes like 15 minutes for the shocks to come back to full extension.. just like the front of a kart. washers up or down.This is funny.
The late models are going to more kart like setup.
The rf is coil bound at race attitude.
The lr is held nearly solid by 4 link bars.
Rear steer merely moves rf more inset of rr, adding traction to rf.
Late model dynamic weight look awful lot like kart dynamic weights.
And now you understand why everyone complains about any bump or rut in the track and why they don't want a cushion. No stops or rubbers on springs/shocks/suspension, one spring per wheel.your not wrong, was just talking with some of my old late model (pavement) guys and they are all on bump stops and tie down shock. so once they touch the brakes, the whole car sets down on rubber stoppers or solid poly blocks with plastic 1/8 inch shims. locks in. takes like 15 minutes for the shocks to come back to full extension.. just like the front of a kart. washers up or down.