Recon Champ Kart set up help

K

Karl13k

Member
Looking for set up numbers for a recon Champ Kart 1/5 mile clay 4 degree bank in corner 425 lbs Animal Engine
 
What's driver weight? What axle is in buggy? Thick or thin wall? What seat is in it? How far off motor rail is right seat strut?
 
Seat placement is good. We run prc thick axle. 60 left 53.5 cross 46 47 nose. 11 7 castor. 1 1/2 front stagger 1in rear stagger. Karts been a rocket.
 
I would highly suggest getting the nexgen seat. Never tried a chavous in the recon but I do no the select made the kart goofy. Seemed like it was really inconsistent. Changed to nexgen and problem solved.
 
Need to be more around this...

Nose: 45.0%
Left: 59.0%
Cross: 53.0%

LF: Camber: +0.25 | Caster: 6 | Toe: 0
RF: Camber: -2.50 | Caster: 8 | Toe: 1/16" Out

The Recon is not designed to run a lot of nose, especially on a champ.

Good luck!
 
James@PRC said:
Need to be more around this...

Nose: 45.0%
Left: 59.0%
Cross: 53.0%

LF: Camber: +0.25 | Caster: 6 | Toe: 0
RF: Camber: -2.50 | Caster: 8 | Toe: 1/16" Out

The Recon is not designed to run a lot of nose, especially on a champ.

Good luck!
Click to expand...
Ok thank you
 
You must log in or register to reply here.
Back
Top