Ride Height ?

What is best way to raise Ride Height ? Running super heavy and left rail touches once in a while. Rear Cassettes are in bottom holes.
 

Oz28

New member
Ck your cassette to see which pill is in it assuming u are running a vector or impulse. If so they make a 0 through 1/4 pills. We run 0's and if we need to raise it up we flip a 1/16 pill upside down to raise the lr. Frame rail. Hope this helps.
 
Just try lowering the tire 1/16 at a time. If on 1/8" hole down try 1/16" hole down, then go to 0 if you need to. What air pressures are you on?
 
Like mentioned, what chassis are you on?

The typical standard for adult classes is to run the 1/16 Pills with the hole up, which adds cross and raises the left side of the chassis slightly.

Millenium's cassettes and hangers are not designed the same as Phantom's, and should NOT be setup in a similar fashion.

Scottie
 
Not real sure on what pills are in it , but I'll check. Running 3.5 and 4.5 on air on very low bite track, more sand than anything.
"Millenium's cassettes and hangers are not designed the same as Phantom's, and should NOT be setup in a similar fashion". Please explain, and it an 2012 Impulse.
 
Millenium's cassette setup is equal axle height on both sides when the 0 Pills are used in the LR.

Phantom's cassette setup needs the 1/8 Pills in the LR, hole down, to be equal height on both sides. That's why you hear about the 1/8 Pill setting all the time when setup info is given.

Not bashing anyone or any product, just pointing out that they are different and require different Pill settings.

Scottie
 
Top