sidewaysagain
Member
How can i kill some left rear in this kart. Entry is ok. Will not stay at the bottom. We pushed out the RR and sucked in the LR. Still not improvement. Thanks
Move the LR back out they should be LR 3/4" RR 3/16 ", without scale numbers or knowing cambers it's a crap shoot as far as a fix, for now as Tony suggest throw some weight up in the nose, front stagger should be more at least 1.25 " but taking away from the rear is not going to help the push center off.How far from the cassette out for the LR & RR? Thanks
Surely someone where you race has a camber gauge, caster you can read the numbers on the blocks, toe you can check with a straight edge and tape measure.Understand, We will scale it and get the numbers. Don't have anything to check the front end though.
Sounds like too much drop it down a couple pounds all around.10 psi
How can i kill some left rear in this kart. Entry is ok. Will not stay at the bottom. We pushed out the RR and sucked in the LR. Still not improvement. Thanks
Don't read to much into it....you went the wrong way on rear tires. RR stays tight to kart, move LR away from kart to eliminate push.How can i kill some left rear in this kart. Entry is ok. Will not stay at the bottom. We pushed out the RR and sucked in the LR. Still not improvement. Thanks