Rubber nose guard

Medic262

Member
I have the rubber nose guard on my fiberglass body. In the heat it has began to peal off and appears the adhesive is coming off. This was a used body but seems it was put on with actual adhesive not the 3m style backing. My question is what adhesive can I use to reapply it and it hold? Thanks in advance.
 
Here is what I use
74EE7767-2F3B-481D-9367-F008F7AD4C43.jpeg
 
We just use the cove board molding that already has adhesive on it. Peel & stick simplicity - no rivets needed. Lasts a solid season or more. If it starts looking a little rough, just heat it up with a heat gun to loosen the adhesive, and replace it.


-----
🏁Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
31 years of service to the karting industry
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com
 
Back
Top