Seraph setup

S

stripminer

New member
I'm looking for a good setup for a 2010 seraph on a 1/8 mile slightly banked track. Mostly on 11s and 22s low bite track driver is 200 pounds. Its mountaineer kart way in ky. Thanks
 
I ride a '12 seraph and have had a fair amount of success on it so far this year. i run mostly on a 1/10 slightly banked low bite track. here are my numbers. hope this helps.

Cross 53.4
Nose 46.9
Left 56.7

2 1/8 rf camber
5/8 + LF camber

I honestly can't remember where I'm at on caster right off hand. I weigh right at 195 with a total weight of 375. I can get you more details if needed.
 
Nose: 46.5-47.0%
Left: 58.5%
Cross: 62.0%

LF: Camber: +3/8 | Caster: 7 | Toe: 0
RF: Camber: -2.75 | Caster: 10 | Toe: 1/16" Out

Stagger: Front: 1-1/2" | Rear: 1-1/4"

Rear Track Width: 39" (RR rim 1/8" from frame rail)

Good luck!
James
 
James@PRC said:
Nose: 46.5-47.0%
Left: 58.5%
Cross: 62.0%

LF: Camber: +3/8 | Caster: 7 | Toe: 0
RF: Camber: -2.75 | Caster: 10 | Toe: 1/16" Out

Stagger: Front: 1-1/2" | Rear: 1-1/4"

Rear Track Width: 39" (RR rim 1/8" from frame rail)

Good luck!
James
Click to expand...



Dead on what we ran our Seraph's at except we ran 0-1/4 LF Camber
 
blopez said:
Would these number apply to a Jr. Sportsman 2, total weight 290? 1/9 of a mile track, very slick.
Click to expand...

Thats the type of track we always ran on. Dry slick. I don't know about a Jr champ as we ran heavy and super heavy flat kart. Also thats Burris tire rule.

I always created a push if we ran over 1/4 lf. This is just what worked for us.
 
You must log in or register to reply here.
Back
Top