Stagger + Gear Recomendations

We got a new track that has moved in and I'm looking for stagger and gearing recommendations for our first practice.

Jr3 Blue Plate

Length 1/8th mile.
Diameter of the driving line looks to be 90'.
Corners are flat and the surface is red clay.

I'm thinking along the lines of a 13 - 65 with a pretty big rear stagger like 1 7/16.
 
If your anywhere close on track size and description your way off on gearing for Blue plate clone, start with like 14/56 if that's not in the cards try 15/60 and go from there, if you start gear bound it will take 3 races to figure it out on your own, 1 1/4 " rear stagger.

Good Luck !!
 
Jr3 clone you should never be above a 63 on rear gear, and try to stay around a 60.
Better be a very tight race track to ever be at that high of a stagger for dirt.
Yes it is a very tight race track. It’s located inside an old asphalt car track. The car track has been converted to dirt but the pit lane really squeezes he infield in pretty tight. Here is a mocked up picture taken from Google Maps which has a measurement function which is where I got an estimated turn radius.
 

Attachments

  • Rock.png
    Rock.png
    629.5 KB · Views: 24
Back
Top