R rowdy66 New member Dec 9, 2013 #1 Im rebuilding a yellow clone and wondering what the torque specs were on the rod cap, sump cover, head, and what the valve clearance should be? thanks for any info
Im rebuilding a yellow clone and wondering what the torque specs were on the rod cap, sump cover, head, and what the valve clearance should be? thanks for any info
S subbietjw Member Dec 9, 2013 #2 GX160/200 Item Thread dia. (mm) Torque (ft-lbs) Connecting rod bolt 9ft/lbs Cylinder head bolt 17ft/lbs Flywheel nut 54ft/lbs Rocker arm pivot lock nut 7ft/lbs Rocker arm pivot bolt 17ft/lbs Crankcase cover bolt 17ft/lbs Muffler mounting nuts 17ft/lbs this should get you done... the lash is .003 or less for most cams
GX160/200 Item Thread dia. (mm) Torque (ft-lbs) Connecting rod bolt 9ft/lbs Cylinder head bolt 17ft/lbs Flywheel nut 54ft/lbs Rocker arm pivot lock nut 7ft/lbs Rocker arm pivot bolt 17ft/lbs Crankcase cover bolt 17ft/lbs Muffler mounting nuts 17ft/lbs this should get you done... the lash is .003 or less for most cams
W W5R New member Dec 10, 2013 #3 Looks right from what i remember but everything was in inch/lbs that i saw, but the conversion to ft/lb looks right
Looks right from what i remember but everything was in inch/lbs that i saw, but the conversion to ft/lb looks right