Trick camber question!!

racerx59m

Member
Just bought a new longacre digital caster and camber gauge and was wondering on the stand how far off it would be if you set it that way?My set up sheet says +2.7 right and 0.5 on the left!I am at +0.7 on the right front and +0.2 on the left front!Ran the kart all season but just got the gauge to check it!
 
camber needs to be set on a level surface(like scales)-with the driver in it and tire pressures set--doubtful if your kart stand is perfectly level
 
Am I reading it the wrong way?And I put the gauge on where you can read it from the seat!

That won't work gauge must be pointing up and bubble on little level between the lines. You need another person to read the gauge or there close to your weight and put them in the seat.
 
Sorry just now saw the request to call had to step out, BUT ya by all means call Jamie he'll hook you up, I'm not real familiar with the digital gauge anyway.

Thanks Jamie
 
My experience with that gauge is its problematic.
You need to calibrate it before each use .
As stated it needs to be level as well.
As stated negative on the right , positive on the left.
On a level scale stand.
 
My experience with that gauge is its problematic.
You need to calibrate it before each use .
As stated it needs to be level as well.
As stated negative on the right , positive on the left.
On a level scale stand.

Yeah I talked with him on the phone
 
Back
Top