Trick LTO setup

riddler26

Member
What is a good set up for a trick Lto for an sr clone class at a track like selinsgrove or capital city daytime race?
Also for a jr 2 kart for these tracks? I don’t think a lot of jrs run the Lto chassis...didn’t know if chassis is too stiff for them? Didn’t know if a closer KPI or different spindles and castor plates would help?
Thanks
Ty
 
Sr Clone 59 % left, 46.5 % nose, 64 % cross, 2.6 RF neg camber, Strong .25 LF pos camber.
Jr 2 56 .5 % left, 47 % nose, 62 % cross, 2.5 RF neg camber, .5 LF pos camber. should be good starting points.

Good Luck !!
 
Ok thanks...so nothing crazy different then for the jr 2 kart?
And do I want to pull the lead back on both karts?
And what about the lead in the rear and do I want to keep the rake in the rear level?
Thanks again
 
Ok thanks...so nothing crazy different then for the jr 2 kart?
And do I want to pull the lead back on both karts?
And what about the lead in the rear and do I want to keep the rake in the rear level?
Thanks again
For those tracks I'd stay in the front hole for now, I'd leave rear factory.
 
Back
Top