Ultra Max chassis question

[KartMan16]

I have an ultra max chassis, inside the brake master cylinder it has 00 135, can anyone tell
me anything about this kart?

Also, the rear bearing holders are tilted in, like towards the inside of the kart, axle spins freely but I’m trying to find out if this is supposed to be this way.
Help, LOL..

 

[Dougherty#39]

Can you post pictures of the frame. Motor rails, front hoop, rear hangers, steering post. Not one of the body.

 

[KartMan16]

Can you post pictures of the frame. Motor rails, front hoop, rear hangers, steering post. Not one of the body.

Well I would but every pic I try to post says it’s too large LOL

 

[flattop1]

Well I would but every pic I try to post says it’s too large LOL

Turn your mega pixals down

 

[Petty Race Engines]

00 135 should be year 2000 and production number 135, so 2000 would have been the umax centerforce. Should be a pill type front spindle, and I do not recall the bearing hangers being angled in, they should be 90 degrees straight up

 

[JRC_Performance]

Petty Racing Engines is correct. And yes the top of the bearing hangers did tilt in on both sides….

 

[martin07]

2000 ultramax proforce had tilted rear bearing hangers

 

[KartMan16]

2000 ultramax proforce had tilted rear bearing hangers

Thank you sir, is knew it looked factory LOL