VDKA Jimmy Hamrick Memorial Race.$$$$..2K Guaranteed to win....June 4th @ Capital City Speedway....

Jimmy Hamrick Memorial Race
********************************************************
2nd Annual Jimmy Hamrick Memorial (clone medium)!
June 4th, Capital City Speedway!
$5,000 raised with 20% going to Drive for Diabetes Awareness, INC.
1st place $2,000
2nd place $900
3rd place $500
4th place $300
5th place $100
$100 pole- sponsored by Tom Shiflet Jr.
$100 lap 7 lead- sponsored by Lou Goebel
Helmet and accessories will be a raffle drawing for anyone who enters this class!
THANK YOU SPONSORS!!!
Avis Electric Company
X-Factor Motorsports
Cycle Gear
BDL Motorsports
John Yancey
S&M Automotive Service
Beautiful Bodies Inc.
Capital City Speedway
Ferrara Equipment Co.
Farmer Machine Company
Hampton Roads Kart Club/Larry King Law's Langley Speedway
Maxxis Kart Racing
Mini Tyrrell
B&E Small Engine Repair
Hawkeye Graphics

*************************************************************************]
PARKING....Contact, Lisa 804 397-7318....
************************************************************************
 

Attachments

  • Jimmy Hamrick Memorial Race.jpg
    Jimmy Hamrick Memorial Race.jpg
    88.4 KB · Views: 35
  • Jimmy Hamrick Memorial Helment Package.jpg
    Jimmy Hamrick Memorial Helment Package.jpg
    70.9 KB · Views: 33
Last edited:
*****
This will be a full day of racing with normal VDKA points & Pro $$$ classes with the additional Jimmy Hamrick Memorial race......
**************
Clones=NKA motorTech rules
Animal=WKA motor Tech rules
212 Predator Tech rules based on spec's of KNOWN stock motor...

Chassis rules based on WKA rules

VDKA rule book is posted on web site..

************************************************************
 
Last edited:
******
Weights: ALL weights must be double-nutted and the threads of
the bolt must protrude approx 1/4" after the jam nut..A nyloc nut or similar locking
nut is recommended as the jam nut....All weights attached to seats or similar
materials must have a large washer between the head of the bolt and seat....5/16"
bolts are the min.size when weight is less than 7 lbs...3/8" bolt is the min size or two
5/16" when weight is 7 lbs or more....... Weights are to be painted WHITE in color....

*****************************

Fuel filter not allowed between the fuel pump and carburetor (ALL CLASSES)

*******************************************

Engine will be teched as raced (ALL CLASSES)

****************************

Tires: Maxxis HT-3, Blues left, Pinks right for all Junior and Senior classes.

****************************************

Air Filters can only filter from the sides of the filter. Air filters with an open end must
be taped over to prevent airflow from the end.

*****************************************
****
The Fuel/Pit Stop Will be the Sheetz Approx 1 Mile North of Track(Toward Ashland) on Rte 1....The Fuel Sample will be used as the Tech sample for ALL Clone & Predator Classes...Spec Fuel Will be the 87 Octane Ethel Gas....Sample Will be Obtained Early Saturday Morning.......
***********************
*****
WIRE TIE SEALS WILL BE USED IN ALL CLASSES.......... QUESTIONS ON WERE HOLES ARE NEEDED CONTACT YOUR BUILDER OR PM ME...*** FYI=Predator (Ducar) holes will be the valve cover bolt head on carb side and rear tab on carb,(Same as clone)...Thanks.....
**********************
 
Back
Top