Venting a 14.5 ci Blockzilla Open

GAKARTER

Member
How are people reducing the amount of oil loss in Opens. Sometimes lose as much as 6 OZs in 15 laps. Running PVC valve setup presently, but still puking a lot of oil at 10K rpms. Has anyone tried an "oil return system" and if so how was it plumbed out?
 
How are people reducing the amount of oil loss in Opens. Sometimes lose as much as 6 OZs in 15 laps. Running PVC valve setup presently, but still puking a lot of oil at 10K rpms. Has anyone tried an "oil return system" and if so how was it plumbed out?
When I was running My Blockzilla 3! I drilled 2 extra vent holes in the valve spring chamber and it let the compressed air inside of the crankcase have a relief from all of the Compression built up by the under side of the piston! Think about it??? What about all of the air compressed in the crankcase! The 2 extra holes solved my problem and I had 2 - 5/8 hoses off of my ARC BREATHER !! You will loose a lot less oil if you let it Breathe. Jim C.
 
Back
Top