Wahlbro Carb Jets.

Where do I buy Jets for the Stock WF carb. I need a 94 and a 96


94 & 96 would be custom machined from blanks. They can be made, but we do not have them in stock currently.
We get so few orders for WF stuff that we just don't keep everything for them on the shelves.


-----
🏁Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
31 years of service to the karting industry
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com
 
If you want individual methanol jets for an Animal or a WF I will gladly make them for you.
Tel 920-207-9180
 
If you want individual methanol jets for an Animal or a WF I will gladly make them for you.
Tel 920-207-9180


I think he's referring to gas jets @ 94 & 96, Jimbo.
Those aren't included in the kit that you referenced in post #3 of this thread, and would not be correct for alcohol.
If you have 94 or 96 reamers, help this man out. I don't have those sizes...Like you, I can make anything for larger alcohol sizes.

OP, you might get lucky and sort through some 93 & 95 mains and find ones that are on the high side.
 
Good catch Brian
Actually the .96 mm jet is the stock jet that comes in the carb from the factory.
The factory jet kit contains .36 and .40 idle jets with a .38 in the carb from the factory.
It contains a .90 a .93 a .98 a .100 and a .102 mm jets again with the .96 mm jet in the carb from the factory


0.93 Millimeters = 0.036614173 Inches

0.94 Millimeters = 0.037007874 Inches

0.037007874 Inches minus 0.036614173 Inches = .000393701" difference
 
I think he's referring to gas jets @ 94 & 96, Jimbo.
Those aren't included in the kit that you referenced in post #3 of this thread, and would not be correct for alcohol.
If you have 94 or 96 reamers, help this man out. I don't have those sizes...Like you, I can make anything for larger alcohol sizes.

OP, you might get lucky and sort through some 93 & 95 mains and find ones that are on the high side.
Good catch Brian
Actually the .96 mm jet is the stock jet that comes in the carb from the factory.
The factory jet kit contains .36 and .40 idle jets with a .38 in the carb from the factory.
It contains a .90 a .93 a .98 a .100 and a .102 mm jets again with the .96 mm jet in the carb from the factory


0.93 Millimeters = 0.036614173 Inches

0.94 Millimeters = 0.037007874 Inches

0.037007874 Inches minus 0.036614173 Inches = .000393701" difference
Sorry i jumped in with the methanol question confusing everyone. Thanks for pointing out that the jet sizes are in MM, that helps me understand the sizing better.
 
Metric to inch by .1 mm
jetting mettric 01 mm.jpg
 
Last edited:
Back
Top