Loren Bartle
Member
Where do I buy Jets for the Stock WF carb. I need a 94 and a 96
what size in inches are the methanol main jets in the kit you offer? And does that fit a world formula? 555537I wish i could help you with individual jets but the only way I have WF jets is in a complete jet kit for $43.88
You can order here:
https://faster-motors-wi.myshopify.com/products/557012-gas-jet-kit?_pos=1&_sid=008020300&_ss=r
Where do I buy Jets for the Stock WF carb. I need a 94 and a 96
If you want individual methanol jets for an Animal or a WF I will gladly make them for you.
Tel 920-207-9180
I think he's referring to gas jets @ 94 & 96, Jimbo.
Those aren't included in the kit that you referenced in post #3 of this thread, and would not be correct for alcohol.
If you have 94 or 96 reamers, help this man out. I don't have those sizes...Like you, I can make anything for larger alcohol sizes.
OP, you might get lucky and sort through some 93 & 95 mains and find ones that are on the high side.
Sorry i jumped in with the methanol question confusing everyone. Thanks for pointing out that the jet sizes are in MM, that helps me understand the sizing better.Good catch Brian
Actually the .96 mm jet is the stock jet that comes in the carb from the factory.
The factory jet kit contains .36 and .40 idle jets with a .38 in the carb from the factory.
It contains a .90 a .93 a .98 a .100 and a .102 mm jets again with the .96 mm jet in the carb from the factory
0.93 Millimeters = 0.036614173 Inches
0.94 Millimeters = 0.037007874 Inches
0.037007874 Inches minus 0.036614173 Inches = .000393701" difference