Ward karting

KKania17 said:
Which eclipse is it the galaxy? Sister kart to the Epic, I ran Phantom Icon spindles on mine then put a slack spindle on the LF when I bent the phantom one. Any 10 degree left and 10/12 degree right spindle will work just may have to adjust or change your tie rods.
Click to expand...
Do you know any rf l blocks that will interchange for the galaxy
 
They might work honestly never tried it or heard of anybody using after market L blocks. Definitely wouldn’t try anything newer than an icon or whenever they switched to the little L blocks that use less washers
 
Jamie, our Vector L blocks should fit it if it's an '04/R1.
I don't know what other Ward karts used the same L blocks...I know the height is taller than most, and the bolt spread is wider. Also the pin location is slightly different and will need re-drilled. We've don this to adapt our L blocks and spindles on some newer? Ward karts.


-----
🏁Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
32 years of service to the karting industry
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com
 
You must log in or register to reply here.
Back
Top