Weight transfer

R

Ravens513

Member
On a sprint chassis we have the weight jacker on left rear and I have adjust the washers to lower the RF. But we turn right and left, why no adjustments on RR or LF with the added weight of the motor, how do we get the RR to lift on a right turn? Probably a dumb question, but have only been at this f,or a few months. Does the right side not lift?
 
yes the right rear should lift also. The weights on the rear tires should be somewhat even especially if the seat is offset to the Left to make up for the added weight of the motor on the right side. the washers on the front should be set evenly and the weight jacker should be neutral to start with and try to achieve 50% cross. then you fine tune from there
 
And as to why no adjustment on the RR...its not necessary because you can simply adjust one of the other corners the opposite direction. All you really need is adjustment on one corner to get your desired cross weight. Now if you are talking about adjusting overall ride height for the fro t or rear separately then thats another story
 
You must log in or register to reply here.
Back
Top