What tool are people using to make clean cuts on fiberglass?

[ZForceRacing]

When I buy a floor pan from say PRC. It's is not notched for the Chain Guard clearance.

But I've bought Used Karts we nice cuts that look like it came from the factory.

What tool makes such clean cuts?

 

[RiffRaffRacin]

When I buy a floor pan from say PRC. It's is not notched for the Chain Guard clearance.

But I've bought Used Karts we nice cuts that look like it came from the factory.

What tool makes such clean cuts?

I just use a grinder with a flap disc

 

[XXX#40]

Put painters tape on before marking, mark on the tape, high speed rotary cutter, Dewalt version of a roto zip

 

[CarlsonMotorsports]

When I buy a floor pan from say PRC. It's is not notched for the Chain Guard clearance.

But I've bought Used Karts we nice cuts that look like it came from the factory.

What tool makes such clean cuts?

Hole saw followed by a Dremel.
Drill two holes (one at either end of where you want the slot,) then Dremel straight between them.



-----
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
www.youtube.com
35 years of service to the karting industry ~ 1Cor 9:24
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com

 

[LDR]

We just fit a new nose to mine. Used our angle grinder with cut disc. Taped where we wanted to cut.

 

[Colt sr]

A steady hand, die grinder with cut off wheel, safety glasses, and mask. Finish it with a file.