TheBeaves26
New member
I got a free go kart. It's got a 110cc motor. I can get it to turn over if I jump the solenoid or power the starter. I got no spark. The brake wires have been fixed together so it cant be the safety. Any ideas?
PTO side?Put a wrench on the PTO side and see if it turns over freely.
So I'd need a wiring diagram?With a multiple circuit failure like start and ignition, I'd check the common denominator which is the power line going to the key switch.
I tried a new plug. If I turn the key to accessory itll work lights and stuff. Just nothing to the starterNo spark - new plug .
Ignition box bad or switch .
Yes it does. If jumping from the solenoid. Just no spark.See if the engine turns over manually by putting a wrench on the cranks Power Take Off and turning it.
This one isn't a gy6 engine I believe. Looks nothing like the 150cc I haveCarefully read this bunch of posts .
Your going too need to lean how to use a multi meter and or a test light .
https://4cycle.com/karting/threads/help-with-yerf-dog-start-button.105704/The wireing diagram link 95 shaw posted should be similar on all off road vehicles .