UNI stage 2 air filter, best ever, use a foam filter, it will filter it way better and your carburator will be clean, i used a bag prefilter and my carburator was pretty dusty not too bad but still, that's why you use a foam filter, lube it also, only needs to be sprayed twice then squeeze the access out, then let er rip. Note every race wash the foam filter im dawn or simple green and water and then squeeze the water out of it and let it Dry, then relube itThoughts and recs for air filter and pre filters on clone engine? Bigger better? Thoughts on foam vs the bag? Filter oil?
WALKER IS ABSOLUTLEY THE BEST YOU CAN GET IT SHOWS UP ON THE DYNO, AND IF YOU WASH AND OIL PROPERLY THEY WILL LAST.Walker makes a fine air filter with one flat side so it clears the top edge of the right body panel. Spendy but if you clean it and re-oil it will last forever. Outerwear makes a pre filter to fit.
UNI stage 2 air filter, best ever, use a foam filter, it will filter it way better and your carburator will be clean, i used a bag prefilter and my carburator was pretty dusty not too bad but still, that's why you use a foam filter, lube it also, only needs to be sprayed twice then squeeze the access out, then let er rip. Note every race wash the foam filter im dawn or simple green and water and then squeeze the water out of it and let it Dry, then relube it
I am using a uni foam filter, plus the old filter was an ARC cotton filter with a bag prefilter, foam filters lubed lightly work rhe best plus no dirt on the carb with my uni foam air filter, but with the bag air filter and arc air filter the carb was dirtyIf you were using a "bag" prefilter over your Uni air filter and you were getting dust in the carb, doesn't that disqualify the Uni from being best ever filter?