Knucklehead_Kn8
Member
I have a Buller '97 Offset. My cousin raced it in the early 2000s for a few years and it sat in as dry garage since. I am introducing my son to the sport this year. I am looking for any info on that model I can find; setup sheets, marketing info, etc.
I am getting it close but struggling to get enough cross into it. It handled good last race but I have to run a tall RF tire to get it to 55-58% and tighten up. It would get loose mid turn and out with 53% or less. Maybe a little bent? I believe it to be 4130 so I can't figure it wore out, however, quite a flex kart.
Also, the camber pills don't allow me to get to the modern -2.5 / +.5 that I see recommended. Curious what would have been recommended by Kermit when that chassis came out, or if I should make new pills?
Any feedback is appreciated. TIA
I am getting it close but struggling to get enough cross into it. It handled good last race but I have to run a tall RF tire to get it to 55-58% and tighten up. It would get loose mid turn and out with 53% or less. Maybe a little bent? I believe it to be 4130 so I can't figure it wore out, however, quite a flex kart.
Also, the camber pills don't allow me to get to the modern -2.5 / +.5 that I see recommended. Curious what would have been recommended by Kermit when that chassis came out, or if I should make new pills?
Any feedback is appreciated. TIA