Bully clutch conversion

[SuperflyJamieLee]

My stock clutch basket is nice and snug but the bully clutch conversion has a lot of play in it. Does anyone know if this is normal. I may be able to post a video later.

 

[OVALTECH1]

are you using bully drivers ?

 

[SuperflyJamieLee]

are you using bully drivers ?

Yes

 

[OVALTECH1]

Hmmmm... what pieces are you using? Seems weird that they wouldn’t work together

 

[SuperflyJamieLee]

It's not that they're not working there's just a lot of slop in it. It's a max torque clutch and the max torque bully conversion kit with real bully gears.

 

[SuperflyJamieLee]

It's also on a hemi predator 212

 

[Gab507]

If you are running outboard and the slop or play is the drum/driver sliding back and forth on the bearing race they make a thin and thicker shim to go before the clutch bolt.

 

[SuperflyJamieLee]

If you are running outboard and the slop or play is the drum/driver sliding back and forth on the bearing race they make a thin and thicker shim to go before the clutch bolt.

I can't post a video but it's like the bearing is too big for the clutch. Even though the Baron and the brass sleeve on the other one are the same size and diameter.