You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Cam question
- Thread starter krtrcn
- Start date
modifiedman
Member
Sorry but a clone cam wont fit the non hemi,with that said some have used the
clone cam in the non hemi but have also made a bushing so it would work.
jmo but if you want to use a clone cam get the hemi and you also have more
cams to pick from.
clone cam in the non hemi but have also made a bushing so it would work.
jmo but if you want to use a clone cam get the hemi and you also have more
cams to pick from.
Lowbudgetkarter
New member
I've ran clone cams in old style preds alot without any problems what so ever
Have been turning 78-8400 also, not to say you won't have problems though!
Have been turning 78-8400 also, not to say you won't have problems though!
DirtRacer7
Member
Just a FYI. I measured a clone 196 and hemi Predator 212 cam journal (blocks and side covers) Both were 0.551. Then I measured a dyno 308 and cl1i cams for clones. They both measured 0.550
Then I measured a non Hemi block (69730) cam journal. It measured 0.558
Then I measured a non Hemi block (69730) cam journal. It measured 0.558