Hello, I have a B&S World formula engine and I had it running in the unit today and I notice that the green air filter attached to the carb was dripping wet with fuel. Anyone know what could be causing this and how I can fix it?
Thank you
It could be that the inlet needle is stuck and the carb is running full rich. Was fuel running out the bowl overflow as well?
Common problem - pull the bowl and clean everything inside extremely well with brake clean. You can take a Q-tip soaked with WD40 and twirl around in the fuel inlet to clean/polish it. Reassemble, setting the floats level and the float drop so the floats won't allow the inlet needle to get hung up. That will likely fix your problem.