I'm am looking for a little help in regards to a clone build. I have absolutely no motor experience and have never attempted a build. However , I thought it might be a nice winter project for my son and I to work on together and learn. I took an old motor we had lying around and built a new one from it. Only original parts I used were the block and crankshaft and ARC 6619 billet fly wheel. Everything else was brand new, head, piston, rod, rings, crankcase bearings, carb, CLR2 Cam etc. Got it all assembled and fired it tonight. It runs , but very roughly. It will not idle on its own and I had to keep goosing the throttle to keep it from stalling. It also appeared to have misting gas coming out of the carb intake, much more than I have ever seen before. My thoughts are that it is probably a timing issue, but I really have no experience and am not sure. For the record I used the stock timing key. Any input would be greatly appreciated. motor is a blue plate. Thank you in advance!!