All info on Dyno Cams is published on there web site for anyone to compare....Any info comparing the Bsp cam against the BSP -2 cam and the Ci i i think ? for sprint racing ,rpms goes as high as 6500 and as low as 2500 in corners
Do you think a 1.3 ratio rocker will work with this cam ? With 18 lbs springs .and what degree do think will work with the arc alum flywheel ?As a general rule -2 means retarded 2 degrees . Retarded favors higher rpm .
Im thinking generally 200 rpm per degree .
Its a local stock appearing class . Nothing crazy.thanks for the inputApparently not a stock rule set .
Yes . 34*-36*
Obviously you need too verify clearance's for yourself. Never assume.
THESE ARE DEFINATLY NOT THE CAMS TO USE FOR A STOCK APEARING CLASSIts a local stock appearing class . Nothing crazy.thanks for the input