jetting for gold plate animal

[five motorsport]

Motor want pick up Rpms some told me the jet is wrong for the plate can some one help need jet or carb

 

[five motorsport]

Motor want pick up Rpms some told me the jet is wrong for the plate can some one help need what size jets do i need

 

[team25]

you may have a fuel inlet needle not stopping the fuel check your oil and see if it is full of fuel

 

[five motorsport]

It dont use alot of fuel it is a stocker carb have heard the jets maybe wrong for plate motor could that be true if so what jets do I need

 

[team25]

in my gold the pilot jet is .047 and main is 1.32 but cant remember if those are the metric or standerd mesruments i will check tonight and let you know

 

[five motorsport]

Please do need to get son running towards front

 

[CarlsonMotorsports]

team25 gave you a starting point. Those size are MM.

A lot depends on the rest of the carb as well as the overall set-up of the engine. The float height might be all wrong, emulsion tube, main fuel nozzle too big, air pick-off size, etc...just so much goes into building a good carb than just throwing jets at it. Give it a try though.

Personally, I'd give the engine builder a call. He can tell you without a doubt how it should be jetted by what work was done to the carb - and save a lot of guess-work.
Worst case scenario, he wants you to send it in to him to have him go through it -- cheap price to pay for a carb that you know will be right when you get it back.

--
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cuts
www.CarlsonMotorsports.com
Celebrating 25 years of service to the karting industry
765-339-4407
bcarlson@CarlsonMotorsports.com