Medium Clone Stall Seed

alvin l nunley

Site Supporter
Let me ask you a question; without a tack, how will you know when you have it set up correctly? I know exactly where it should be set, at peak torque, I'm just wondering how you're going to know where that is?
 

Taw Jackson

New member
Let me ask you a question; without a tack, how will you know when you have it set up correctly? I know exactly where it should be set, at peak torque, I'm just wondering how you're going to know where that is?
I was going to look in the Buller clutch... Then I would set it up as to what they recommend... That's the best I can do
 

racing promotor

Moderator
Where should I start with Spring Height... This clutch is a 2 disc/4 springs with red springs with weights on a 1/8 mile dirt oval... Thanks
That's a question for JPM or someone that does clutches. But do a search in clutch forum Spring Height JP and Brian explain it.
 

triton03

Member
We still dyno all our motors and set the stall at peak torque ours range from 3400 to 3800 very rarely it’s 3800 most of them are 3600 but we write on every motor the stall rpm
 
Top