FritzMotorsports48
New member
Trying to get a setup for a nemisis being run on the flat paperclip type track at Warren County Speedway, which is at the fairgrounds in Warren, PA. The class which we are running is the senior flathead mediun 350 class. Currently we are weighing 359 pounds total weight, with the driver weighing 192 and the kart weighing 167 pounds. The corner weights is as follows: LF 75.5, RF 89, LR 130 and RR 64 pounds. The nose weight is at 45.8%, left side weight is at 57.3% and the cross is at 61.2%. Toe is set at 1/8 out on the LF, with LF camber set at +1/2 and the RF camber set at - 2 1/2. The kart always seems to want to push from the center of the turn off, other than that it seems in be ok. We ran this set up at Race - 1 in Dubois, PA this past weekend and it was way to tight for that type of high banked bullring. Any help would be greatly appreciated either on here or text/call 814-449-5980. Thanks.