mike97760 Site Supporter May 13, 2022 #5 Guessing, since you show no pictures or descriptions of the leak, that you are talking about the side cover. Take the bolts out, install 5/16 external star washers and use blue loctite on the bolt. Torque to specs. Check regularly.
Guessing, since you show no pictures or descriptions of the leak, that you are talking about the side cover. Take the bolts out, install 5/16 external star washers and use blue loctite on the bolt. Torque to specs. Check regularly.
B Biggie1 Member May 13, 2022 #6 Sorry I'm trying to upload an image but it keeps loading Attachments 20220513_102914.jpg 107.4 KB · Views: 31
B Biggie1 Member May 13, 2022 #7 That's the front of the engine. The center of the bolt is rubber and has a slim hole in it
flattop1 Dawg 89 May 13, 2022 #8 You have to plug that hole with something. Several ways to do it . Silly cone . Is the easiest . The low oil wires originally came out there.
You have to plug that hole with something. Several ways to do it . Silly cone . Is the easiest . The low oil wires originally came out there.
mike97760 Site Supporter May 13, 2022 #9 Its easiest to just push 2 pieces of wire back thru them and silicone.