I apologize i advance to you guys if you get these questions all the time, i have searched quite a bit looking for this info but cant seem to find it out there.
i bought a Powerfist 212 engine ( i was under the assumption it was a relabeled predator 212)
i got it from Princess Auto (HF for Canada) here is a link to the actual engine i bought. https://www.princessauto.com/en/212cc-ohv-gas-engine/product/PA0009089269
so for the questions, im just not sure what i have, it seems to be a mix of parts. I'm looking to build it and I need to know what engines to order the parts for
the cylinder head is an odd ball its non hemi but has 5.5mm valve steams, 27mm intake, 25mm exhaust. so that's a non hemi head with hemi valves in it. its for sure a non hemi head, it has an octagon valve cover, non hemi combustion chamber, and non rectangle valve cover gasket
the cam, flywheel and rod are the ones I cant figure out
using these measurements what would these parts be (clone, hemi, non hemi)
CAM - journal size 0.550" (i believe this is a "HEMI" cam)
ROD - big end 1.180"
small end 0.709"
CtC length 3.304"
FLYWHEEL - big end bore 0.870"
small end bore 0.670"
taper length 1.020"
Thanks in advance
so far it seems its a non hemi head but hemi sized valves, non hemi piston but a hemi cam shaft
here is a pic of the head and some parts
i bought a Powerfist 212 engine ( i was under the assumption it was a relabeled predator 212)
i got it from Princess Auto (HF for Canada) here is a link to the actual engine i bought. https://www.princessauto.com/en/212cc-ohv-gas-engine/product/PA0009089269
so for the questions, im just not sure what i have, it seems to be a mix of parts. I'm looking to build it and I need to know what engines to order the parts for
the cylinder head is an odd ball its non hemi but has 5.5mm valve steams, 27mm intake, 25mm exhaust. so that's a non hemi head with hemi valves in it. its for sure a non hemi head, it has an octagon valve cover, non hemi combustion chamber, and non rectangle valve cover gasket
the cam, flywheel and rod are the ones I cant figure out
using these measurements what would these parts be (clone, hemi, non hemi)
CAM - journal size 0.550" (i believe this is a "HEMI" cam)
ROD - big end 1.180"
small end 0.709"
CtC length 3.304"
FLYWHEEL - big end bore 0.870"
small end bore 0.670"
taper length 1.020"
Thanks in advance
so far it seems its a non hemi head but hemi sized valves, non hemi piston but a hemi cam shaft
here is a pic of the head and some parts
![53458474619_f40c00da07_b.jpg](https://live.staticflickr.com/65535/53458474619_f40c00da07_b.jpg)
Last edited: