Thanks for the referral, JanGaLanG.
Not only have I been all over the midwest, but all across the country.
I've seen/raced more dirt tracks (big cars and karts) than probably anyone, so I know a little about tracks from coast to coast. AND, we have customers coast to coast, so if I haven't been to your track personally, we likely have customers running there. I'd say this is somewhat true with most of the prep guys that are on here supporting racers. I'm fairly certain that none will purposely steer you wrong. If they don't know about your track, they would say so. With that said, any reputable prep guy can help you out.
Our prep line is easy to use and understand. Simple and effective!
With Burris, you'll primarily use two products: Our Black Bite 2.0 to add bite without softening, and our Monster Bite to add a ton of bite and soften 2-3 points per wipe. Those are the only two you should need, unless you are needing some internal for your 33s (which is kinda rare.)
If you need more bite, wipe more coats. Less bite - less coats. Use the Monster Bite as a PRW right before going to the grid and it won't have time to lower the duro.
Any other questions, please feel free to give us a call at the shop during regular business hours or drop me a message on here, our Facebook page, or through email.
-----
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cut
z
www.CarlsonMotorsports.com
Carlson Motorsports on
Facebook
33 years of service to the karting industry ~ 1Cor 9:24
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com