Vortex Red questions

R

Rocket07

Member
Are black springs in the second hole correct for a flathead? Or should they be in hole 3?

Just double checking before I run a new clutch. Never had a vortex before.
 
Rocket07 said:
Are black springs in the second hole correct for a flathead? Or should they be in hole 3?

Just double checking before I run a new clutch. Never had a vortex before.
Click to expand...

Is it an unrestricted flathead? If so , I run mine in the third hole, if it is a restricted engine the second hole is where I run them. Hope this helps
 
Are these clutches much "taller" than a bully clutch because of how the springs mount to the levers ? May have a clearance problem with the clutch guards we need to run ?
 
We run the center hole with a sr clone...Just modify the clutch guard or take it off. You could drill new holes in the chainguard and move it out closer towards the seat.
 
The Vortex clutches like all other two disc clutches fit in a space 4 inches inches in diameter, three inches long. Three disc clutches are 1/4 inch longer; two disc clutches are 1/4 inch shorter.

Vortex clutches can be mounted outboard (springs in) or inboard (springs out).

Additional information can be found here: www.kartclutches.com

TF
 
You must log in or register to reply here.
Back
Top