Track Tac

Wearing the inside of RF like crazy!!!

Track Tac, rolled 3oz kryptonite and let cure out a week, wiped a couple coats of topaz to get the duro where I wanted and hit with a coat of mint and let set another week. Then wiped 2 coats of black sand the week before practice.

Toe was set at 1/16 I will have to go out and verify it is still set at 1/16. I am running a wiggy bar set as far left as you can mount it.
 
I was in the same boat with my Seraph that I purchased from a fast race team. Did everything I could to not burn up the right front tire, camber changes, harder tires etc. What I found out after the season and rebuilding the front end was the king pins, spherical bearings etc. were worn out. We have not burned up one tire, the kart does not push at all, and I have washers to move to raise and lower the spindles etc. We had a good baseline to work off of and still could not get anything to work. Check your hardware on the front end for burning up tires will cost more than rebuilding the front end.
 
You must log in or register to reply here.
Back
Top