Lo206 clutch..

J par

Member
How do I know if my current clutch is good or going bad or needing replaced? And what is the best clutch? And why??
Thank you for everybody's help an experience...
I just looked this up and all I seen was talk about brands and installation...
 

flattop1

Dawg 89
Ha ha if it's red hot it's going out .
What type drum or disc .
If it's reving up and going not as fast as normal or revs up in a slow turn .
They usually last pretty good .
The bearing needs a dab of grease now and then. Lightly .
 

J par

Member
Ha ha if it's red hot it's going out .
What type drum or disc .
If it's reving up and going not as fast as normal or revs up in a slow turn .
They usually last pretty good .
The bearing needs a dab of grease now and then. Lightly .
Thank you! I do have a couple things from drag racing I can use. So far I've used tire pressure gauge. I can bring my infrared heat gun and check the actual temperature...??..
Mostly asking because I don't see it lasting forever but maybe...
it seems like I hear some rattling noise and I assume that's where it's coming from..
It's certainly not a whole shot machine LOL off the start but does seem to grab and not let go once moving..
I guess I just don't have a lot of gauge between what's good and what's bad and when it's bad what to get. I did count the teeth and it is 16...
 

flattop1

Dawg 89
Watch your rpm at take off . Hopefully it in the 26-3200 range . When that starts changing it it's time for new shoes or replacement .
The shoe clutch's can make a little more noise then the disc .
Watching the temp could be good idea .
 

J par

Member
Watch your rpm at take off . Hopefully it in the 26-3200 range . When that starts changing it it's time for new shoes or replacement .
The shoe clutch's can make a little more noise then the disc .
Watching the temp could be good idea .
I know when I have the wheels off the ground on the stand it connects right at 29 to 3K...
 
Top